BulletShield
Retrofit UL 752 Bullet Resistant Glass Security Panels
Secure Your Glass with UL 752 Standard Bullet Resistant Polycarbonate
“Body Armor for Windows,” our proprietary BulletShield polycarbonate shields offer impressive ballistic resistance at a fraction of the cost. Designed to protect the most targeted area of a building – the glass.
BulletShield bullet resistant glass security panels are a:
- Patented, professionally installed glazing security system
- Retrofit existing windows, doors, storefronts and curtainwall
- Customized solution that costs far less than full bullet-resistant reglaze
Anatomy of the BulletShield System
1) Patented vented extrusion mounts to the existing glazing frame creating standoff for the polycarbonate shield from primary glass
2) “Super bond” anchoring method secures the engineered system to the existing glazing providing for unmatched flex, tensile and tear strength upon attack
3) “Unbreachable” UV capped, clear polycarbonate shield is secured to the vented extrusion with security “flex” screws and elastomeric VHB tapes
4) Customized powder-coating creates full aesthetic integration with existing glazing upon retrofit installation
How BulletShield Bullet Resistant Polycarbonate Glass Security Panels Work
BulletShield is an overglaze that mounts onto existing window or door frames, creating a protective layer that mitigates ballistic attack through glass.
Each system is custom fabricated based on perceived threat levels, budgets, and existing glazing conditions. Installed by certified dealers, systems may utilize exotic plastics, polycarbonates, or glass-clad shields depending on performance requirements.
All-weather adhesives, high-performance films, VHB tapes, and mechanical security anchors may be used to install the system. BulletShield is independently tested to meet forced entry and UL 752 ballistic standards.
Bullet Resistant Window Overglaze System Deters Entry & Slows Active Shooters
BulletShield is an ideal bullet resistant glass solution for buildings most vulnerable to ballistic threats:
- Commercial Buildings
- Schools & Universities
- Hospitals
- Corporate Offices
- Government Buildings & Police Stations
- Retail Storefronts
BulletShield Videos
-
BulletShield Product Demonstration
-
BulletShield vs. 9mm, .357, & .44 Magnum Rounds
-
BulletShield Panel Undergoes UL Level 1 Testing
Customer Testimonials
“As a security and protective design and engineering consultant for 45 years, and after having participated in reviewing, analyzing, testing and subsequently specifying many different force protection products for clients with extreme security concerns, I would strongly advise those in similar positions to consider the products sold under the “DefenseLite” brand name, and fabricated, furnished and installed by Impact Security. We have submitted their products to personal attacks by our security specialists and been engaged in having their products tested under live firing range conditions by elite law enforcement agencies for ballistic resistance and forced entry and can attest to their efficacy and value.”.
Robert Ducibella Founding & Senior Principal
RAPCS LLC & Emeritus DVS
"While there are numerous aspects to any comprehensive security program, if you are able to make the windows of a facility difficult or impossible to breach, you can significantly enhance the overall security of the site. Many institutions take actions to secure their facilities without considering the “why” behind those actions. The best security plans are rooted in security principles that allow you to gain time during an emergency situation, and keep a threatening person at a distance. This is exactly why we utilized DefenseLite and BulletShield for our more vulnerable clientele, worldwide. Having worked on numerous and complicated security projects all over the world we have also experienced the value of having a high quality partner to properly install these items. Jeff Franson and his team have always done a stellar job, going above and beyond, and have ensured that the windows at our sites have the highest level of security features."
Ariel Siegelman President
DRACO Group
"I just wanted to take a minute to let you know that we recently had an attempted break in, the key word here is (attempted). Around 5:30 AM 3 individuals pulled up to the store, got out of a car, wearing masks and carrying bats and bricks. One started throwing a landscaping brick (~10 pounds) at the glass door protected by DefenseLite and the rock just bounced off, the other two went to work on one of the windows with the bats. The bats had little effect on the DefenseLite. After about 5 minutes of repeatedly throwing the brick at the door the glass behind the DefenseLite broke, but the DefenseLite stayed intact. The three spent a total of 8 and a half minutes beating on the Defense with rock and bats and still did not get in. I am 100% confident had I not chosen to put the DefenseLite they would have gotten it and gotten away with countless guns and I would have been dealing with the ATF and State Police for weeks if not longer and there would be a lot of illegal guns on the street. DefenseLite is hands down the best means of keeping bad people out of your store."
Mark Glavin President
Fox Valley Shooting Range
"Recently we had a torch attack on the side door at our Patagonia Portland Store (there have been two now). And last week we had a cinderblock attack on the same set of doors. There are no broken door glass, the doors were not damaged, and no intrusions into our store. Without DefenseLite, the damage to the door glass and doors would have been in the 10K range minimum. Then you have the amount of product that could have been taken out of our store. And then (a harder matrix to measure) store moral and store appearances would have most likely have suffered. Bottom line, DefenseLite works again! "
Joe Tayag Loss Prevention
Patagonia
"DefenseLite recently completed a very complex lobby project for us which entailed a specialized design with multiple pieces and required a challenging installation. We could not be happier. The project was a grand success and the DefenseLite management as well as installers, were the utmost professionals demonstrating genuine care and customer service. Their technical knowledge is superb. We felt very taken care of as updates and good communication with us were continually provided. Thanks!"
Doug Feliciano, J.D. Director of Facilities Security
Office of the County Executive, County of Santa Clara
BulletShield FAQs
What is BulletShield by DefenseLite?
A derivative of DefenseLite, BulletShield is a retrofit, bullet-resistant, clear glass security shield that installs over existing window and door glass. BulletShield is Body Armor for Windows and independently tested to meet UL 752 ratings for ballistic protection.
How is BulletShield Installed?
BulletShield is installed over existing window and door glass by certified installers. Mounted either on the exterior or interior of current glass, BulletShield bullet resistant glass security panels anchor to existing windows to create a buffer zone between the primary glass and the BulletShield clear polycarbonate shield. Weather sealed and engineered for removal when needed, BulletShield is custom-made for every window opening and designed to blend in to the existing framing. BulletShield is nearly invisible upon a completed installation.
What are the benefits of BulletShield other than security?
BulletShield can reduce street noise by up to 40 percent and improve energy efficiency of existing glass by more than 50 percent. BulletShield will defeat most attacks, while protecting the primary glass from breaking. BulletShield by DefenseLite incorporates a proprietary sacrificial film coating on its surface that defeats graffiti tagging, while protecting the shield from damage.
Where can I buy BulletShield?
BulletShield is available for installation across the US and can be purchased by calling 1-888-689-5502 or by locating a dealer here. Our process includes helping you define your threat level and the appropriate BulletShield solution that does the job while fitting your budget.
What is the warranty for BulletShield?
BulletShield warranties range from a minimum of 2 years up to 15 years depending on the system installed. Custom warranties and service agreements are available.
Does BulletShield meet UL752 standards?
Yes. BulletShield has been independently tested to UL752 standards and are ballistic rated. All ballistic test reports are available for review.
How much does BulletShield cost?
Professionally installed DefenseLite and BulletShield costs depend on existing glazing conditions, performance requirements, system design and overall project scope.
How does BulletShield compare to other Bullet Resistant Glass security solutions?
BulletShield is unique. Designed to protect existing window and door glass from ballistic attack, BulletShield is the perfect, customizable solution when fully rated ballistic glazing systems are either too expensive or not possible due to the existing conditions of the space you are aiming to fortify. BulletShield is not glass and will not fracture or ‘white-out’ during attack.
Are there special BulletShield programs for schools?
Yes, BulletShield has a program designed specifically for schools and campuses. Making schools safer for our children is the most important service we provide.
Are there special programs for NSSF members?
Yes. BulletShield has a program designed specifically for NSSF members. Like you, we want to keep stolen firearms off the streets, so we have discounted our installed systems for NSSF members to protect as many stores as possible.
Are there special programs for NRF, LPRC, and CLEAR members?
Yes. Many NRF members are under relentless assault from violent criminals. BulletShield has special pricing, warranty and service agreements for all NRF members. Our aim is to promote the adoption of these products within the LP/AP community while stopping this violent crime.